$1D $2F
Printers: KPM300
VeriPrint
, KUBE II
VeriPrint
, KUBE-L
VeriPrint
, TK300II
VeriPrint
[Name]
Print dowloaded bit image
[Format] ASCII
GS
/
m
Hex
1D
2F
m
Decimal
29 47 m
[Range]
[Description]
Prints a downloaded bit image using the mode speci
fi
ed by m.
m
selects a mode from
the table below :
m MODE
0,48 Normal
1, 49
Double width
2, 50
Double height
3, 51
Quadruple
[Notes]
• This command is ignored if a downloaded bit image has not been de
fi
ned.
• In standard mode, this command is effective only when there is no data in the print buffer.
• This command has no effect in the print modes (emphasized, underline, character size,
or white/black reverse printing), except for upside-down printing mode.
• If the downloaded bit-image to be printed exceeds the printable area, the excess data
is not printed
• If the printing area width set by $1D $4C and $1D $57 is less than one line in vertical,
the following processing is performed only on the line in question:
1) The printing area width is extended to the right up to one line in vertical. In this case,
printing does not exceed the printable area.
2) If the printing area width cannot be extended by one line in vertical, the left margin is
reduced to accommodate one line in vertical.
[Reference] $1D
$2A
[Example]
$1D $3A
Printers: KPM300
VeriPrint
, KUBE II
VeriPrint
, KUBE-L
VeriPrint
, TK300II
VeriPrint
[Name]
Start/end macro defi nition
[Format] ASCII
GS
:
Hex
1D
3A
Decimal
29
58
[Description]
Starts or ends macro de
fi
nition.
[Notes]
• Macro de
fi
nition starts when this command is received during normal operation.
• When $1D $5E is received during macro de
fi
nition, the printer ends macro de
fi
nition
and clears all de
fi
nitions.
• Macros are not de
fi
ned when power is turned on to the machine.
• Macro content is not cancelled by the $1B $40 command. Therefore, $1B $40 may be
included in the content of macro de
fi
nitions.
• If the printer receives $1D $3A a second time after previously receiving $1D $3A, the
printer remains in macro unde
fi
ned status.
• The contents of the macro can be de
fi
ned up to 1024 bytes. If the macro de
fi
nition
exceeds 1024 bytes, excess data is not stored.
[Default]
[Reference] $1D
$5E
[Example]
ESC/POS™ Emulation
Command Reference
55
Содержание KPM300
Страница 72: ...Blank page ESC POS Emulation 72 Command Reference ...
Страница 127: ......
