Custom Audio Electronics KPM300, Справочник по командам

Страница: 64 / 128

$1D $76 $30
Printers: KPM300
VeriPrint
, KUBE II
VeriPrint
, KUBE-L
VeriPrint
, TK300II
VeriPrint
[Name]
Print raster bit image
[Format] ASCII GS v 0 m xL xH yL yH d1...dk
Hex 1D 76 30 m xL xH yL yH d1...dk
Decimal 29 118 48 m xL xH yL yH d1...dk
[Range] 0 ≤ m ≤ 3, 48 ≤ m ≤ 51
0 ≤ xL ≤ 255
0 ≤ xH ≤ 255 (1 ≤ xL + xH x 256 ≤ 65535)
0 ≤ yL ≤ 255
0 ≤ yH ≤ 8 (1 ≤ yL + yH x 256 ≤ 2047)
0 ≤ d ≤ 255
k = (xL + xH × 256) + (yL + yH × 256)
(except for k = 0)
[Description] Selects raster bit image mode. The value of m selects the mode as follows:
m MODE
0,48 Normal
1, 49 Double width
2, 50 Double height
3, 51 Quadruple
• xL, xH selects the number of data bits (xL+xH x 256) in the horizontal direction for the
bit image.
• yL, yH selects the number of data bits (yL+yH x 256) in the vertical direction for the bit
image.
k indicates no. of the image data. k is an explanation parameter; it is not necessary to be
transmitted.
• d indicates the image data.
[Notes] • In standard mode for receipt paper, this command is effective only when there is no data
in the print buffer.
• The data (d) identify as 1 a printer bit and as 0 a non-printed bit.
• If a raster bit image is longer than one line, the surplus data aren’t printed.
• This command has no effect in all print modes (character size, emphasized,double-strike,
upside-down, underline, white/black reverse printing, etc.) for raster bit image.
• This command feed the paper as much as necessary to print the bit image without using
spacing set by $1B $32 or $1B $33.
• Do not use this command during a macro executing because this command should not
be included in a macro.
• After the printing the printing starting position moves to the beginning of the line.
• The following table shows the relationship between the downloaded bit image and the
printed data:
d1 d2 ... dx
dX+1 dX+2 ... dX × 2
: : ... :
... dk-2 dk-1 dk
[Reference]
[Example]
ESC/POS™ Emulation
64
Command Reference