Custom Audio Electronics KPM300, Справочник по командам

Страница: 16 / 128

[Notes] • The printer can underline all characters, but cannot underline the spaces set by $09,
$1B $24, $1B $5C and 90°/270° rotated characters.
• This command resets the left and right margin at default value (see $1D $4C, $1D
$57).
• $1B $45 can also be used to turn the emphasized mode on/off. However, the last-received
setting command is the effective one.
• $1B $2D can also be used to turn the underlining mode on/off. However, the last-received
setting command is the effective one.
• $1D $21 can also be used to select character height/width. However, the last-received
setting command is the effective one.
[Default] n = 0
[Reference] $1B $2D, $1B $45, $1D $21
[Example]
$1B $24
Printers: KPM300
VeriPrint
, KUBE II
VeriPrint
, KUBE-L
VeriPrint
, TK300II
VeriPrint
[Name]
Set absolute print position
[Format] ASCII ESC $ nL nH
Hex 1B 24 nL nH
Decimal 27 36 nL nH
[Range] 0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Description] Sets the distance from the beginning of the line to the position at which subsequent
characters are to be printed.
The distance from the beginning of the line to the print position is [(nL + nH × 256) ×
(vertical or horizontal motion unit)] inches.
[Notes] • Settings outside the speci fi ed printable area are ignored.
• The horizontal and vertical motion unit are speci fi ed by $1D $50.
• $1D $50 can change the horizontal (and vertical) motion unit. However, the value cannot
be less than the minimum horizontal movement amount.
• In standard mode, the horizontal motion unit (x) is used.
• If the setting is outside the printing area width, it sets the absolute print position, but the
left or right margin is set at default value.
[Default]
[Reference]
$1B $5C, $1D $50
[Example]
$1B $25
Printers: KPM300
VeriPrint
, KUBE II
VeriPrint
, KUBE-L
VeriPrint
, TK300II
VeriPrint
[Name]
Select/cancel user-defi ned characters
[Format] ASCII ESC % n
Hex 1B 25 n
Decimal 27 37 n
[Range] 0 ≤ n ≤ 255
[Description] Selects or cancels the user-de fi ned character set.
When the Least Signi fi cant Bit (LSB) of n is 0, the user-de fi ned character set is can-
celled.
When the LSB of n is 1, the user-de fi ned character set is selected.
[Notes] • Only the LSB of n is applicable.
• When the user-de fi ned character set is cancelled, the internal character set is automati-
cally selected.
[Default] n=0
[Reference]
$1B $26, $1B $3F
[Example]
ESC/POS™ Emulation
16
Command Reference