Custom Audio Electronics KPM300, Справочник по командам

Страница: 19 / 128

• If the width of the printing area set by $1D $4C and $1D $57 is less than the width re-
quired by the data set using $1B $2A, the excess data are ignored.
• To print the bit image use $1B $4A or $1B $64.
• After printing a bit image, the printer returns to normal data processing mode.
• This command is not affected by the emphasized, double-strike, underline (etc.) print
modes, except for the upside-down mode.
• The relationship between the image data and the dots to be printed is as follows:
8-dot bit image 24-dot bit image
d1
Print data
d3 d2
MSB
LSB
Bit-
image
data
Print data
MSB
LSB
Bit-
image
data
d4
d6
d5
d1
d3 d9
d8 d2
d7
[Default]
[Reference]
[Example]
$1B $2D
Printers: KPM300
VeriPrint
, KUBE II
VeriPrint
, KUBE-L
VeriPrint
, TK300II
VeriPrint
[Name]
Turn underline mode on/off
[Format] ASCII ESC - n
Hex 1B 2D n
Decimal 27 45 n
[Range] 0 ≤ n ≤ 2
48 ≤ n ≤ 50
[Description] Turns underline mode on or off, based on the following values of
n
:
n = 0, 48 Turns off underline mode
n = 1, 49 Turns on underline mode (1-dot thick)
n = 2, 50 Turns on underline mode (2-dot thick)
[Notes] • The printer can underline all characters, but cannot underline the space and right-side
character spacing.
• The printer cannot underline 90°/270° rotated characters and white/black inverted char-
acters.
• When underline mode is turned off by setting the value of n to 0 or 48, the data which
follows is not underlined.
• Underline mode can also be turned on or off by using $1B $21. Note, however, that the
last received command is the effective one.
[Default] n=0
[Reference] $1B
$21
[Example]
ESC/POS™ Emulation
Command Reference
19