manualshive.com logo in svg

Curtiss-Wright SCRAMNet+ SC150 VME6U, Справочник по аппаратуре

Поделиться
Скачать
Curtiss-Wright SCRAMNet+ SC150 VME6U Скачать руководство пользователя страница 26

SCRAMNET NETWORK 

 

Copyright 2007 

2-12 

VME6U HARDWARE REFERENCE

 

2.10.5 

Write-Me-Last Mode

 

The Write-Me-Last mode of operation allows the originating node to be the last node in 
the ring to have the data deposited to its memory. This can be useful for synchronization. 
This means that when the host performs a WRITE to the SCRAMNet

+

 shared memory, 

this data is not immediately written to the host node’s memory, but is first sent to the 
other nodes on the network. When the message returns to the originating node it is 
written to shared memory, and is then removed from the network ring.  

Therefore, host-originated data written to shared memory travels the ring updating the 
SCRAMNet

+

 node memories on the ring and, upon returning to the originating node, 

that node WRITEs the data to its own shared memory as the last node on the ring. This 
guarantees that the data is available on all other nodes.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание SCRAMNet+ SC150 VME6U



































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды