Cuckoo CRP-RT10 Fuzzy Series, Руководство по эксплуатации

Страница: 70 / 84

70
CHECK BEFORE ASKING
FOR SERVICE
▼ If there is a problem with your cooker, check the following details before requesting service to your dealer.
Sometimes the cooker may not operate as desired if used incorrectly.
Press the button and it
shows ‘ ’
• Is the inner pot inserted?
• Is it used in 110V (Power supply)?
• Please insert inner pot.
• This product is AC 220V only.
When the HIGH
PRESS./TURBO button
does not operate with
‘ ’ • Did you turn the Cover Handle to
“HIGH PRESSURE ” or
“ NON PRESSURE” direction?
• Is “HIGH PRESSURE ” or “ NON
PRESSURE”
signal light on?
• Make sure to close the lid and turn the Cover
handle to “HIGH PRESSURE ” or “
NON PRESSURE” while cooking.
You cannot select menu if the pressure mode
is not correctly selected.
When the rice is badly
sticky.
• Is there any rice or any other alien
substance on the temperature sensor or
the bottom surface of the inner pot?
• Did you set “Customized Cooking
Function”?
• Clean all the alien substance on the
temperature sensor or the bottom surface of
the inner pot.
• Stop cooking or set “Customized Cooking
function" for cooking according to needs.
When “ -> ” mark and
“unlock” mark are flashing • Is the lid open? • When cooking, keeping warm, or making
reservations, please close the lid and proceed.
• If you do not close the lid during cooking,
there is a risk of burns due to hot steam.
Odor appear after cooking
or during keep warm
process? • Did you clean it after cooking? • Please follow Operating Instruction on how to
clean detachable cover and pressure packing.
When the lid cannot be
closed. • Is the Cover handle on the LID set to
“ NON PRESSURE“?
• Is there hot food in the inner pot?
• Is the inner pot correctly inserted in the
main body?
• Please turn the Cover handle to “ NON
PRESSURE”.
• Make the pressure weight tilted and then
close the cover
• Insert the inner pot properly.
When ‘ ’ appears on
the display. • Problem on environment sensor • Unplug power and contact to Customer
Service center.
When ‘ ’, ‘ ’
appears on the display. • Problem on micom memory • Unplug power and contact to Customer
Service center.
Case Check points Do the following