Cuckoo CRP-RT10 Fuzzy Series, Руководство по эксплуатации

Страница: 52 / 84

52
HOW TO CLEAN
How to use the handle
2. To close the lid, turn the handle
to “ NON PRESSURE“ as
shown in the picture on the left.
1. Check to make sure the inner
pot is placed correctly inside
the main body.
3. If there is excess steam inside the
inner pot it might be difficult to lock the
handle. Twist the pressure weight and
allow the excess steam to release.
Then try to turn the handle again.
How to use the handle
How to clean the soft steam cap
※ Do not touch the surface of the soft steam cap right after cooking. You can get burned.
Do not try to close the LID by force. It can damage your cooker and cause problems.
❶ Peel off the soft
steam cap as
shown in the image
above by grasping
the dented part with
your fingers and
pulling to the side
while lifting gently. ❷
Disassemble the hook on the front by pressing
in the direction of the arrow and wash it with a
sponge and neutral detergent. After cleaning,
please assemble the parts in order.
※ Be sure that the inserted side of the
Packing is the correct side of it.
❸
To reassemble the Soft Steam Cap,
fit the cap to the bump part, and then
press the hook in the direction of the
arrow.
❹ When installing
the soft steam
cap, insert the
cap firmly by
pressing it in the
direction as
shown above.
1. Make sure to close the lid and turn the cover handle to “ NON PRESSURE“ or “HIGH PRESSURE ”
while cooking.
•
You can select cooking with HIGH PRESSURE when you turn the handle to “HIGH PRESSURE ”.
This is the function of safety device which indicates that the cooker is properly locked, and cooking with
HIGH PRESSURE is available.
•
If you turn the handle to “ NONE PRESSURE” you can choose to cook without pressure or select cooking.
Then “ NONE PRESSURE” signal is displayed on the Display.
•
If “HIGH PRESSURE ” or “ NONE PRESSURE” does not appear on the Display, Preset/Auto Clean
button does not work.
2. When cooking with HIGH PRESSURE is done, turn the cover handle
from “HIGH PRESSURE ” to “ NONE PRESSURE,” and then press
the Clamp knob to open the lid.
• If steam is not completely exhausted after cooking, the handle might not
be easily turned from “HIGH PRESSURE ” to “ NONE PRESSURE.”
In such a case, allow remaining steam to escape by tilting the Pressure
weight.
3. Make sure that the cover handle is completely turned to “ NONE
PRESSURE” when opening and closing the lid.