Cuckoo CRP-RT10 Fuzzy Series, Руководство по эксплуатации

Страница: 53 / 84

53
www.cuckooworld.com
ENGLISH
FUNCTION OPERATING PART / ERROR CODE AND POSSIBLE CAUSE
Keep Warm/
Reheat button
Use for warming or reheating
the cooked rice before eating.
Preset/Auto Clean
button
Use it to preset the cooking
time you want.
When you use automatic
steam cleaning function.
Time/
Setting button
Used to set GABA Rice,
High Pressure Steam, Porridge, Baby Food,
Non Pressure Steam cooking time.
Used to modify the Preset time.
Used to set keep warm temperature,
customize individual keep warm preference,
customize individual cooking preference.
Used to set ‘Scorched Rice(crispy rice)’.
Menu/
Select button
Used to select Glutinous, High Heat Glutinous, Mixed Rice, High Heat Mixed Rice,
GABA Rice, High Heat GABA Rice, Turbo Glutinous, Scorched Rice, High Pressure
Steam, Non Pressure Rice, Porridge, Baby food, Non Pressure Steam.
Used to change the function selected by the Time/Setting button.
Cancel button
This function is used to cancel a
selection or release remaining steam
in the inner pot. (Keep pressing the
Cancel button for 2 seconds for
safety reason if you want to cancel
while cooking.)
NON Press. button
Used to start non-pressure cooking
and non-pressure cooking
HIGH Press./
Turbo button
Used to start high-pressure cooking
and high-pressure cooking
Display
When the product has any problems or used it inappropriately, you can follow the below marks.
If error persistently shows up even in normal using conditions or after taking measure, inquire with customer service.
Error Code and Possible Cause
When the inner pot is not placed into the unit.
When pressing the ‘HIGH Press./Turbo’ and ‘Keep Warm/Reheat’ and ‘Preset/Auto Clean’ and ‘Menu/Select’ button,
while the cover handle is on incorrect pressure mode. Turn the cover handle “High Pressure ” or “ Non Pressure”.
When boiling only water and When the product
fails. Please contact Customer Service center. Problem on micom memory. Please contact
Customer Service center.
It is appears on the display when you press ‘HIGH Press./Turbo’ or ‘Preset/Auto Clean’ button again, or if the
HIGH PRESSURE cooking has finished and you've never ever turned the handle to “ Non Pressure”, It can be
solved by turning handle to “ Non Pressure” and then turn to “High Pressure ”. If the problem persists,
contact the customer service center.
Problem on environment sensor. Please contact
Customer Service center. Problem on micom memory. Please contact
Customer Service center.
Problem on temperature sensor. (“ ” mark, “ ” mark, “ ” mark blink.)
Inquire with customer service.
※ If no operation is done while power cord is plugged, the system while be on standby mode as shown in the figure.
(The menu on standby screen, time and customized rice taste stage may differ depending on user configuration.)
※ If cancel button is pressed during cook, the rice cooker will go on standby mode.
※ Press the button until the buzzer sounds. Picture may vary depending on model.
< Screen on standby >