Cub Cadet Tank S S7237 Скачать руководство пользователя

Страница: 8 / 48

ectiOn

2 — i

MpOrtant

afe

peratiOn

ractices

WARNING!

Your Responsibility—Restrict the use of this power machine to persons who read, understand and

follow the warnings and instructions in this manual and on the machine.

SAVE THESE INSTRUCTIONS!

Safety Symbols

This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the

machine before attempting to assemble and operate.

Symbol

Description

READ THE OPERATOR’S MAnUAL(S)

Read, understand, and follow all instructions in the manual(s) before attempting to

assemble and operate

WARnInG— ROTATInG BLADES

Do not put hands or feet near rotating parts or under the cutting deck. Contact with the

blade(s) can amputate hands and feet.

WARnInG—THROWn OBJECTS

This machine may pick up and throw and objects which can cause serious personal injury.

WARnInG—THROWn OBJECTS

This machine may pick up and throw and objects which can cause serious personal injury.

BYSTAnDERS

Keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in

operation.

MAX

WARnInG— SLOPE OPERATIOn

Do not operate this machine on a slope greater than 15 degrees.

DAnGER — ROTATInG BLADES

To reduce the risk of injury, keep hands and feet away. Do not operate unless discharge cover

or grass catcher is in its proper place. If damaged, replace immediately.

CAUTIOn/DAnGER — OVERFILLInG IS HAZARDOUS/FLAMMABLE GAS & LIQUID

This cylinder is designed to contain a liquified petroleum gas under pressure that is

highly flammable, operating & servicing of this cylinder must be conducted by persons

properly trained & qualified in accordance with local, state, federal or provincial jurisdiction

requirements.

Содержание Tank S S7237

















































Результаты поиска

Содержание Tank S S7237

Отзывы:

Похожие инструкции для Tank S S7237

Бренды по названию

Популярные бренды

Cub Cadet Tank S S7237, Руководство оператора

Результаты поиска

Содержание Tank S S7237

Отзывы:

Похожие инструкции для Tank S S7237

Бренды по названию

Популярные бренды