Cub Cadet Tank S S7237 Скачать руководство пользователя

Страница: 2 / 48

Customer Support

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of

this machine, you can seek help from the experts. Choose from the options below:

Visit us on the web at www.cubcadet.com

◊

Locate your nearest Cub Cadet Dealer at (877) 282-8684

◊

Write us at Cub Cadet LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019

◊

Thank you for purchasing a Cub Cadet Commercial Zero-Turn

tractor

. It was carefully engineered to provide excellent

performance when properly operated and maintained.

Please read this entire manual prior to operating the equipment.

It instructs you how to safely and easily set up, operate and

maintain your machine. Please be sure that you, and any other

persons who will operate the machine, carefully follow the

recommended safety practices at all times. Failure to do so could

result in personal injury or property damage.
All information in this manual is relative to the most recent

product information available at the time of printing. Review

this manual frequently to familiarize yourself with the machine,

its features and operation. Please be aware that this Operator’s

Manual may cover a range of product specifications for various

models. Characteristics and features discussed and/or illustrated

in this manual may not be applicable to all models. We reserve

the right to change product specifications, designs and

equipment without notice and without incurring obligation.
If you have any problems or questions concerning the machine,

phone your local Cub Cadet dealer or contact us directly. Cub

Cadet’s Customer Support telephone numbers, website address

and mailing address can be found on this page. We want to

ensure your complete satisfaction at all times.
Throughout this manual, all references to

right

and

left

side of the

machine are observed from the operating position.

Thank You

Record Product Information

Before setting up and operating your new equipment, please

locate the model plate on the equipment and record the

information in the provided area to the right. Pivot the seat

assembly forward to locate the model plate on the frame under

the seat. This information will be necessary, should you seek

technical support via our web site or with your local Cub Cadet

dealer.

Odel

uMber

erial

uMber

To The Owner

Safe Operation Practices ........................................ 3

Assembly & Set-Up .................................................10

Controls & Features ................................................14

Operation ................................................................17

Maintenance & Adjustments ................................ 24

Service .................................................................... 35

Troubleshooting .................................................... 39

Replacements .........................................................41

Attachments & Accessories .................................. 43

Specifications ......................................................... 44

Warranties ............................................................. 46

Table of Contents

Содержание Tank S S7237

















































Результаты поиска

Содержание Tank S S7237

Отзывы:

Похожие инструкции для Tank S S7237

Бренды по названию

Популярные бренды

Cub Cadet Tank S S7237, Руководство оператора

Результаты поиска

Содержание Tank S S7237

Отзывы:

Похожие инструкции для Tank S S7237

Бренды по названию

Популярные бренды