Cub Cadet Tank S S7237 Скачать руководство пользователя

Страница: 26 / 48

ectiOn

6— M

aintenance

& a

djustMents

number of Oil Points

Description

DAILY

Deck Suspension Pivots

Height Adjustment Turnbuckle Clevis Pin

Height Adjustment Handle Pivots

Height Adjustment Stop Pivots

Deck Lift Linkage Pivots

Transport Handle Pivots

Transport Handle Pin

Deck Frame Up-and-Down Pivots

WEEKLY

Seat Hinge

Speed Control Linkage Rod End Bearings

Pump Control Lever Pivots

Brake Lever Pivot Clevis Pin

Brake Lever Control Rod Pivot

Brake Control Rod Swivel Joint

Brake Rod Clevis Pins

Brake Shaft Assembly Pivots

Grass Collection System Lid Hinges (If Mower is so equipped)

OIL CHART

Apply a few drops of SAE engine oil, grease, or use a spray lubricant. Apply the oil to both sides of pivot points. Wipe off any excess.

Start engine and operate mower briefly to insure that oil spreads evenly.

Engine Oil:

Rimula 15W40 recommended or 10W40 engine oil rated SJ or higher.

Hydrostatic Fluid:

Rimula 15W40 recommended and 1.5 ounces of Ornite additive.

Spindle Lubricant:

Use only Shell Alvania RL 2 grease. This grease is an amber-colored grease designed for high speed bearing

applications. It has a base oil viscosity that reduces running losses, has been formulated for low noise, has excellent corrosion

protection, and has excellent bearing lubrication.

General Purpose Lubrication:

Use any nLGI grade 2 multi-purpose grease. Shell Albida EP2 is recommended. Shell Albida EP 2

is a red-colored multi-purpose grease designed for heavy-duty bearing applications. It has high base oil viscosity for mechanical

stability, has been formulated for high load, low-speed applications, and has excellent lubrication and corrosion protection.

Содержание Tank S S7237

















































Результаты поиска

Содержание Tank S S7237

Отзывы:

Похожие инструкции для Tank S S7237

Бренды по названию

Популярные бренды

Cub Cadet Tank S S7237, Руководство оператора

Результаты поиска

Содержание Tank S S7237

Отзывы:

Похожие инструкции для Tank S S7237

Бренды по названию

Популярные бренды