CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 89 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section F
17
Aerial part development – Basket
manoeuvres
- from the frame station, move the selector SA2 to
the central basket control position.
- enter the basket.
- close the door, making sure it is locked well;
- hook on the safety belts;
- check that the lights HN3, HN5, HN6, are on;
- to carry out boom lifting from the support column:
press the SJ1 button at the top of the joystick.
Intervene on the manoeuvres described in
chapter “
Main controls - Section D ”.
ATTENTION
Carry out manoeuvres
individually to keep equipment
stress at a minimum.
Boom lifting from the support column inhibits
stabilisation movement.
Therefore if the horizontal position of the platform
must be corrected, the boom must be brought
back onto the column.
Rotation of the auto-platform is ±270° .
Basket rotation
The basket can rotate 60° to the right or 60° to the
left.
The operator can perform this manoeuvre from the
control station in the basket with the joystick SJ2.
The basket must be centred to be able to close
the platform on the support.
Stopping manouvres
If needed, the operator can immediately interrupt
manoeuvres pressing the red emergency button
SB2 .
To restore normal functioning, just carry out a semi-
rotation as indicated by the arrows on the button.
- +
HN6
HN5
HN3
ON
OFF
ON
OFF
ON
OFF
M
OFF
ON
M
ON
- +
ON
BZ202682
SJ2
SJ1
SB2
01gg0133
UM1007
SJ1
SJ2
SA2