CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 122 / 148

1 Section H
CHAIN WEAR CHECK
TOOL
PLATFORM CONFIGURATION FOR THE OPERATION:
MAINTENANCE:
PERIODIC INTERVENTION
WHO MAKE THE MAINTENANCE
MAINTENANCE
Configuration needeed
The equipment
EACH 1 MONTH OR 1000 WORKING HOURS.
WARNING
-
AUTHORIZED WORKSHOP
The chains should be periodically checked and tested to determine any faults
(abnormal wear, corrosion).
The visible part of the chains will also act as a reference for the part inside the
booms which is hard to reach.
This type of check must make sure the chain structure has not been modified
or deformed with respect to original condition, with the formation of cracks, chinks,
evident wear of both the pins and links.
If any faults are found, the chain will have to be changed.
Environmental factors: special environmental factors
(for instance corrosive environments or presence of abrasive materials) can affect
chain life (early wear and breakage due to corrosion stress).
The presence of rust on the chain is a sign of end of chain cycle.
In such cases, it is important to protect the structure by increasing the chain
cleaning and lubricating frequency.