CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 88 / 148

Instructions for Useand
M a i n t e n a n c e
Section F
16
Stabiliser controls at the station in the basket (optional)
UM1103_ITA
SC14
SC12 SC13
SJ1
asse y
ON
1
4 2
3
SA2
HN5
HN6
UM1102
Instructions on how to use the optional stabiliser
controls at the basket station.
Make sure the ground in the work area is solid and
firm. Next:
- At the station in the frame, turn the SA2 selector to
the central position to select the basket station.
- Check the red HN5 indicator light at the basket station
is flashing; this means the stabilisers can be operated.
- Move the SC14 selector to its ON position to activate
the stabilising function.
- Move the SJ1 joystick along the Y axis and press the
manual button to move all the stabilisers
simultaneously.
You can also turn on the
SC12 and/or the SC13
selector to move each stabiliser separately.
- Check the platform is horizontal using the basket BL
spirit level. Adjust the single stabilisers if necessary to
make the platform perfectly level.
- When you have done, the green HN6 indicator light
turns on, enabling elevation.
ATTENTION
For correct stabilisation, the vehicle
wheels must be lifted from the
ground, except for when the
manufacturer of the vehicle has
prescribed to work with the wheels
on the ground. This information
will be inserted in the document
attached to the manual “Work area
machine dimensions”.
ATTENTION
With outriggers and beams out of
position, the light H3 in the cabin
should be on
RETRACT
EXTENSION