CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 109 / 148

Section H
LUBRIFICATION OF THE ARTICULATION
All platform pins are equipped with a ball lubrificator (see the label 01).
For lubrification of joynt and articulations use the lubrification pump and inject grease under
pressure throught the ball lubrificators until the old exhausted grease exits.
Lubrificate all the articulation points and all the parts equipped with lubrificators.
Clean all the parts removing (if possible) the exhausted grease poured out from the joint points.
The damage or obstructed lubrificators must be replaced.
OIL AND GREASE SPECIFICATIONS
PLATFORM CONFIGURATION FOR THE OPERATION:
MAINTENANCE:
TOOLS
PERIODIC INTERVENTION
WHO MAKE THE MAINTENANCE
MAINTENANCE
See picture 01
GREASE NILS NILEX EP1
GREASE PUMP (BETTER IF PNEUMATIC)
EACH MONTH OR EACH 0 WORKED HOURS
WARNING
DO NOT MIX WITH GREASE COMPOSED
BY THICKEN OF A DIFFERENT KIND
FINAL USER / AUTHORIZED WORKSHOP
Picture 01
Label 01
Grease pump (manual)
Grease pump
(pneumatic)