CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 86 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section F
14
Manual stabilisation manoeuvres with HE cross-beams
EXTEND COMPLETELY THE OUTRIGGER.
AS SOON AS THE EXTENSION IS
COMPLETED, PIVOT A WILL
HAVE TO RE-POSITION ITSELF AUTOMATICALLY
TO THE INITIAL CONDITION LOCKING THE OUTRIGGER.
IF PIVOT A DID NOT RETURN
AUTOMATICALLY TO
THE INITIAL POSITION,
IT WILL BE NECESSARY
TO EXECUTE THIS
OPERATION MANUALLY.
C
A
AS SOON AS PIVOT A
RETURNS TO THE INITIAL
CONDITION, CONNECT
THE SAFETY SPLIT PIN C .
For version with
HE cross-beams
The procedure indicated above is the “configuration with completely extended beams”.
The operator can decide to use different configurations from the above-mentioned one keeping
in mind that the work areas of the platform will change (see page 7 Section F).
To proceed with stabilisation manoeuvres, make sure that the selector SA2 is in the outrigger selection
position.