CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 23 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section B
Operating position B: Stabilising controls
Standing operator position.
This is where the following are fitted:
-
the distributor for the control of the stabilisers;
- the solenoid valve to switch from the car side system to the elevating part system and vice versa.
Operating position C: Emergency controls
Standing operator position.
This is where the solenoid valves are fitted, to be used to perform the operations for the car to return to
the ground in the event of a system malfunction and for the lifting platform to return for transportation.
Operating position D: Manual pump for the circulation of the hydraulic oil
Standing operator position
This is where the emergency pump is fitted, which allows the operator to reactivate the circulation of the
hydraulic oil for the return of the lifting platform for transportation in the event of a malfunction on the main
pump.