CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 76 / 148

I n s t r u c t i o n s f o r U s e
a n d M a i n t e n a n c e
Section F
Activate the rotating lights when
the platform is operational.
Before using the machine,
correctly position the stabilisers
on ground that is sufficiently
compact and level the vehicle
perfectly using the spirit level.
Before entering the basket verify
that the weight of the operator and
the equipment does not exceed
the values shown in the capacity
diagram and on the CE plate.
Only access the control posts
using the relevant ladders.
Climbing on or off the machine
once it has been raised from the
transportation configuration is
prohibited.
It is mandatory for the operator to
use suitable safety harnesses.
During platform use, the control
post for emergency interventions
must be handled by expert
personnel.
Leaving the platform (unguarded)
in a position that is different from
the transportation configuration,
without removing the keys from
the control panel, is prohibited.
Using the platform with wind
speeds above 45 km/h is
prohibited.
Using the platform to lift load or
transport materials is prohibited.
Using the platform while it is
leaning on other structures that
are external to it is prohibited.
Using the platform in
environments that are subject to
the risk of explosion is prohibited.
Once on the platform it is
important to be careful because
the aluminium anti-slip parts have
sharp edges that may cause
problems for the operator.