CTE B-LIFT PRO Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 125 / 148

1 Section H
PERIODICAL MAINTENANCE TABLE
MAINTENANCE
Daily check:
safety device check
Hydraulic oil level check
Cleaning: clean of the step, handles, access point…
paint coat check; avoid the water point accumulation to not create rust
emergency engine fuel level check
labels and plates applied check and if necessary their replacement
hydraulic system leaking check
maintenance after first 250 hours/work or 3 month
(the most restrictive condition):
- authorized workshop -
Lubrification of the articulations / pins
pressure filter replacement
tank filter replacement
maintenance after 500 hours/work or 6 month
(the most restrictive condition):
Turntable lubrification
Gearmotor oil level check / change
Lubrification of the articulations / pins
maintenance after 1000 hours/work or 1 year
(the most restrictive condition)
- authorized workshop -
Turntable lubrification
Gearmotor oil level check / change
Lubrification of the articulations / pins
Safety device check (authorized workshop)
Lubrification of the telescopic elements
hydraulic oil condition check and if necessary replacement of it
telescopic elements clearance and slide block wear and tear
pressure hydraulic filters replacement
tank hydraulic filter replacement
turntable screw tightening
subframe screw tightening
general control of the elevating work platform structure, weldings,
screws (expecially basket screws)
chain lubrification
chain tightening
chain wear check
tensioning of ropes
emergency engine oil change
check ball-bearing clearance
extraordinary maintenance after 7000 hours/work or 7 year
(the most restrictive condition)
chain/ropes replacement
structure check: steel, welding, clearance (slewing devices), structural pins, bush
hydraulic oil replacement
Gearmotor oil change