CTC Union GSi 16, Руководство по установке и обслуживанию

Страница: 93 / 120

93
CTC GSi 16
Dansk Nederlands Čeština
Eesti Polski Slovenščina
Svenska Norsk English
Deutsch Suomi Française
Diff thermostat function
Settings language
Charge start diff temp ºC 7
Charge stop diff temp ºC 3
Charge temperature ºC 60
Settings language
12.12 Diff thermostat function
The diff thermostat function is used if you want to
transfer heat from a tank with the sensor (B46) to a tank
with the sensor (B47).
The function compares the temperatures in the tanks
and when it is warmer in the first tank (B46), charging
starts to the second tank (B47).
However, this function cannot be combined with the
same function in a solar heating system (when e.g.
an EcoTank is connected). This is because the same
outlets and sensors are used for both functions.
Charge start diff temp, °C 7 (3—30)
Here you can set the temperature difference determining
when charging to the EHS tank should start. The
temperature must be this many degrees warmer than
the EHS-tank for charging to start.
Charge stop diff temp, °C 3 (2—20)
Here you can set the temperature difference determining
when charging to the EHS tank should stop. When
the temperature difference falls below this set value,
charging stops.
Charge temperature °C 60 (10—95)
Setting for the maximum permitted temperature in the
EHS tank. Transfer stops once the set temperature has
been reached.
!
Ensure a high flow on the pump
(G46) so that a low temperature
difference of approx. 5–10°C is
achieved over the EHS tank during
charging.