CTC Union GSi 16, Руководство по установке и обслуживанию

Страница: 88 / 120

88 CTC GSi 16
Sensor test active No (No/Yes)
Whether or not the solar sensor should be activated is
indicated here. If the solar panel sensor cannot can be
installed in such a way that the actual panel temperature
can be detected, the charge pump needs to run for
a while for the panel’s fluid to have an effect on the
sensor.
-Test/Pause, min 4 (1—20) /30(80—180)
Test (4): This is where you indicate the duration of the
sensor test so that awkwardly positioned sensors have
enough time to detect the correct temperature. The
length of the sensor test should be as short as possible
to prevent heat being taken from the tank unnecessarily
in situations when the solar panel cannot charge.
Pause (30): The time between the sensor tests is
indicated here. A new sensor test will start after the
pause.
-Winter break No (No/Yes) Nov - Feb
The months during which there will not be a sensor test
are indicated here. During the winter, when the panel (as
a rule) cannot heat the tank, there is no need to carry
out sensor tests. A sensor test carried out at that time
of year can lead to some tank heat being dumped in the
solar panel, which should be avoided.
Prioritise charging of: External heat
source/X-volume
This is where you indicate whether the tank for the
external heat source or the X-volume (acc. tank) should
be prioritised when charging (shown only if alternate
charging has been defined).
Flow l/min 6.0 (0.1 — 50.0)
The flow circulating through the solar collectors should
be indicated here. (This can be read from the flow