CTC Union FRM220-MSW404 Скачать руководство пользователя страница 64

Страница: 64 / 179

Chapter 4. Web Configuration & Operation

CHAPTER 3

WEB OPERATION & CONFIGURATION

Replace:

Replace the DHCP client packet information with the switch’s relay information. This is the default

setting.

Keep:

Keep the client’s DHCP information.

Drop:

Drop the packet when it receives a DHCP message that already contains relay information.

3.4.5.4.3 Relay Statistics

DHCP Relay Statistics

Transmit to Server:

The number of packets that are relayed from client to server.

Transmit Error:

The number of packets that resulted in errors while being sent to clients.

Receive from Client:

The number of packets received from server.

Receive Missing Agent Option:

The number of packets received without agent information options.

Receive Missing Circuit ID:

The number of packets received with the Circuit ID option missing.

Receive Missing Remote ID:

The number of packets received with the Remote ID option missing.

Receive Bad Circuit ID:

The number of packets whose Circuit ID option did not match known circuit ID.

Receive Bad Remote ID:

The number of packets whose Remote ID option did not match known Remote ID.

Client Statistics

Transmit to Client:

The number of relayed packets from server to client.

Transmit Error:

The number of packets that resulted in error while being sent to servers.

Receive from Client

: The number of received packets from server.

Receive Agent Option:

The number of received packets with relay agent information option.

Replace Agent Option:

The number of packets which were replaced with relay agent information option.

Keep Agent Option:

The number of packets whose relay agent information was retained.

Содержание FRM220-MSW404




















































































































































































Результаты поиска

Содержание FRM220-MSW404

Отзывы:

Похожие инструкции для FRM220-MSW404

Бренды по названию

Популярные бренды

CTC Union FRM220-MSW404, Руководство пользователя

Результаты поиска

Содержание FRM220-MSW404

Отзывы:

Похожие инструкции для FRM220-MSW404

Бренды по названию

Популярные бренды