Chapter 4. Web Configuration & Operation
44
CHAPTER 3
WEB OPERATION & CONFIGURATION
Click the “Delete” button to remove a newly-inserted entry or select the checkbox to remove a saved entry during the
next save.
Click the “Save” button to save settings or changes.
Click the “Reset” button to restore changed settings to the default settings.
3.4.4.4 RMON Event Configuration
RMON Event Configuration page is used to set an action taken when an alarm is triggered.
Delete:
Check to delete the entry. It will be deleted during the next save.
ID:
Specify an ID index. The range is 1
~
65535.
Desc:
Enter a descriptive comment for this entry.
Type:
Select an event type that will take when an alarm is triggered.
None:
No event is generated.
Log:
When the event is triggered, a RMON log entry will be generated.
snmptrap:
Sends a trap message to all configured trap managers.
logandtrap:
Logs an event and sends a trap message.
Community:
A password-like community string sent with the trap. Although the community string can be set on this
configuration page, it is recommended that it be defined on the SNMP trap configuration page prior to configuring it
here. The allowed characters are 0
~
127.
Event Last Time:
The value of sysUpTime when an event was last generated for this entry.
3.4.4.5 RMON Statistics Overview
This RMON statistics overview page shows interface statistics. All values displayed have been accumulated since the
last system reboot and are shown as counts per second. The system will automatically refresh every 60 seconds by
default.
