Chapter 4. Web Configuration & Operation
58
CHAPTER 3
WEB OPERATION & CONFIGURATION
Mirror:
Display mirror function is enabled or disabled.
Counter:
Display the number of frames that have matched any of the rules defined for this ACL.
Click the plus sign to add a new ACE entry.
ACE Configuration
Ingress Port:
Select the ingress port of the access control entry. Select “All” to apply an ACL rule to all ports or select a
particular port.
Policy Filter:
Select the policy filter type. “Any” means no policy filter is assigned to this rule (or don’t care). Select
“Specific” to filter specific policy with this ACE.
Frame Type:
Select a frame type to match. Available frame types include Any, Ethernet, ARP, IPv4. By default, any
frame type is used.
Action:
Select the action type, either to permit or deny.
Rate Limiter:
Enable or disable the rate limiter when matched frames are found.
EVC Policer:
Enable or disable EVC Policer. Note that ACL rate limiter and EVC Policer cannot be enabled at the same
time.
EVC Policer ID:
When EVC Policer is enabled, you can further
select EVC Policer ID. The allowed values are “Disabled”
and 1 through 256.
Mirror:
Enable or disable mirror function.
Logging:
Enable or disable logging when a frame is matched.
Shutdown:
Enable or disable shutdown a port when a frame is matched.
Counter:
Display the number of frames that have matched any of the rules defined for this ACL.
VLAN Parameters
802.1Q Tagged:
Select whether or not the frames should be tagged.
VLAN ID Filter:
Select the VLAN ID filter for this ACE.
