Chapter 4. Web Configuration & Operation
27
CHAPTER 3
WEB OPERATION & CONFIGURATION
IPv4:
The QCE will match only IPV4 frames.
IPv6:
The QCE will match only IPV6 frames.
Port:
Indicates the list of ports configured with the QCE.
Action:
Indicates the classification action taken on ingress frame if parameters configured are matched with the
frame's content. There are three action fields: Class, DPL and DSCP.
CoS:
Classified QoS class; if a frame matches the QCE it will be put in the queue.
DPL:
Drop Precedence Level; if a frame matches the QCE then DP level will set to value displayed under DPL
column.
DSCP:
If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column.
Conflict:
Displays Conflict status of QCL entries. As H/W resources are shared by multiple applications, it may happen
that resources required to add a QCE may not be available. In that case it shows conflict status as 'Yes', otherwise it is
always 'No'. Please note that conflict can be resolved by releasing the H/W resources required to add QCL entry on
pressing 'Resolve Conflict' button.
3.3.6 Ports Detailed Statistics
This page provides detailed traffic statistics for a specific switch port. The displayed counters are the totals for receive
and transmit, the size counters for receive and transmit, and the error counters for receive and transmit. Use the port
select pull down to select which switch port details to display.
Receive Total and Transmit Total:
Rx and Tx Packets:
The number of received and transmitted (good and bad) packets.
