Crystal Vision
Using card edge controls
TANDEM-300 User Manual R1.2
46
14/02/2008
6.5 Setting
audio
gains
Audio gain may be set independently for each of the four audio channels leaving the
TANDEM-300 embedding router. The gain is variable from zero (mute) to eight times
unity gain (799%).
The Audio Gain menu is obtained by setting MENU levers 5 and 6 both ON (DOWN)
and all other levers UP or OFF.
The ADJ shaft encoder varies the gain for the channel selected with the SEL switch..
The available audio gain settings are summarised in the following table:
SEL
No.
Audio gain
Examples and comments
ADJ funct
0
CH 1
AG1.1 100. Side 1 Audio Channel 1 set to
unity gain.
ADJ= 0 to 799%
1
CH 2
AG1.2 100. Side 1 Audio Channel 2 set to
unity gain.
ADJ= 0 to 799%
2
CH 3
AG1.3 100. Side 1 Audio Channel 3 set to
unity gain.
ADJ= 0 to 799%
3
CH 4
AG1.4 100. Side 1 Audio Channel 4 set to
unity gain.
ADJ= 0 to 799%
Notes:
The gain setting is associated with router inputs, rather than audio sources or
destinations. This means that audio gain settings will apply to the current routing table
and will not change if (say) a different audio group is chosen for de-embedding.
