CRUISING ELECTRONICS E-Meter, Руководство пользователя

Страница: 33 / 56

33
Advanced Functions
CAUTION: If you set the discharge floor high, such as 50%, and continue
to discharge well beyond this point, you will notice that the bar graph does
not "fill up" until you have charged the battery above the discharge floor. In
other words, if you set the discharge floor at 50% and discharge 75%, you
must recharge back up to the 50% level before your bar graph and time of
operation will again give you meaningful information.
DEFAULT: 100% RANGE: 50-100% Step: 5%
F10 - F12 SEE LOW BATTERY ALARM SEE PAGES 35-38
F13 SEE HIGH VOLTAGE NOTES SECTION PAGE 50
F14 ENABLE LOW BATTERY ALARM
In versions of Your Meter equipped with the Low Alarm Switch, this
function allows the Low Battery Alarm to be disabled.
DEFAULT: OFF
RANGE: ON, OFF
F15 SOFTWARE REVISION Displays revision of software.
Please note that the software enhancements to Your Meter may not be
retrofitted into earlier versions of this product. If Your Meter has
serial number 005000 or larger, it will come with software version
E1.3 or greater installed. Earlier versions of Your Meter do not
support temperature sensing, small Amp-hour increments, separate
alarms for meter power and low battery conditions. Early versions
display
255
instead of
CCC
when the battery is being charged.