CRUISING ELECTRONICS E-Meter, Руководство пользователя

Страница: 19 / 56

19
Reading the Bar Graph
Under the LED bar graph are the words
RESET , DATA , LOCK ,
and
FUNC
. These words are ignored during normal operation. They are
used to indicate programming and advanced function modes which are
explained beginning on Page 34.
Setting Battery Capacity is Important
The LED bar graph display shows how much of your battery has been con-
sumed. If you do not set your battery capacity correctly, your bar graph will not
give you an accurate indication of battery state-of-charge. Your Meter also uses
declared capacity to calculate the Time Remaining, the charged current for Charge
Efficiency Factor calculations, and other control functions.
Setting capacity correctly is very important, see Page 21
BATTERY STATE-OF-CHARGE
Full (Charged Parameters Met)
80-99% +
60-79%+
40-59%+
20-39%+
0-19%+
Above the digital display are four LEDs. They tell you the battery's state-
of-charge at a glance. Four green LEDs means your battery is full. One
flashing red light means it's nearly discharged. The table below shows the
six different displays indicating battery state-of-charge. Under certain
light conditions green may appear yellow.
EMPTY FULL