CRUISING ELECTRONICS E-Meter, Руководство пользователя

Страница: 20 / 56

20
Pressing and holding the
SET
button for 3 seconds enters the Set Up and
Advanced Functions mode. The word
SEL
apppears in the display, prompting you
to press the
SEL
button to choose what function you want to
SEL
ect.
Pressing
SEL
chooses a variable or function. The SET UP mode always begins
at the (Volts) function. Each press of the
SEL
button scrolls to the next item.
When a variable or function is selected, its LED is on and its present value is
displayed. To change an item press the
SET
button until the value appears that
you wish. The order displayed and brief descriptions are below.
LIGHT DESCRIPTION
Charged Voltage ( The Voltage above which the battery must rise to be full.)
Charged Current % (Charging current must be below this percentage times
the battery capacity to be considered full. See Page 22-23.)
Battery Capacity in Amp-hours
Time interval over which current is averaged for time remaining function.
Using the Buttons
Advanced Functions. See Page 30.
Locks out SET button & Advanced Functions. See
Page 28.
Displays: CEF, # CEF Recalc's, Avg. Depth of
Discharge, Deepest Discharge, Avg. Rate of Dis-
charge. See Page 29.
Resets Ahrs & allows Reset to Factory values. See
Page 28.
Each LED is lit in sequence to indicate function.