CRUISING ELECTRONICS E-Meter, Руководство пользователя

Страница: 14 / 56

14
Meter Wiring Detail
Make the necessary wire connections to Your Meter as
shown in the following diagram:
CAUTION
Use correct sized screwdriver
for terminal screws. Tighten
firmly but do not over-tighten to
avoid damage
Color code shown for
CECO 4 twisted pair
cable. Part #s below:
PN 910007 -15'
PN 910009 -25'
PN 910010 -50'
1) For Voltages above 50V a Prescaler must be used. See Page 44.
DC - Meter Negative (BLACK) [1]
Shunt Sense Lead Load Side (GREEN) [2]
Shunt Sense Lead Battery Side (ORANGE) [3]
Battery Volt Sense (0-50V DC
1
)(BLUE) [4]
DC + Meter Power (9.5-40V DC) (RED) [5]
Optional Temperature Sensor Input [6]
Optional Low Battery Alarm [7]
Optional Temperature Sensor Ground [8]
Top Rear View