CRUISING ELECTRONICS E-Meter, Руководство пользователя

Страница: 30 / 56

30
Advanced Functions
Advanced Functions
FUNC
Allows setup of Advanced Functions.
To access the
FUNC
mode,
SEL
ect the
FUNC
mode as previously described.
The letters
F0i
will appear in the display and the
FUNC
LED will be lit indicating
you are in the
FUNC
mode. Continue pressing the
SEL
button until the function
you wish to setup appears. Now press
SET
until the desired value or mode
appears. Repeat this procedure until you have setup all of the desired advanced
functions. Whatever functions you have setup will become active when the
display reverts to its normal mode.
F01 AUTO DISPLAY SCANNING
Automatically scans V, A, Ah, and T. Each value displayed for 4 seconds.
DEFAULT: OFF RANGE: OFF or ON
F02 ENHANCED SLEEP MODES
DEFAULT: ON Range: ON, OFF, AU (AUTOMATIC)
When the Sleep Mode is ON, Your Meter's numeric display turns off
after 10 minutes in order to reduce power consumption. Pressing either
SET or SEL buttons returns the numeric display to operation.
When the Sleep Mode is OFF, the numeric display stays on at all times.
In the special automatic sleep mode (displayed as
Au
), the numerics are
on whenever charging or discharging exceeds 1 Amp. When the rate of
charge or discharge remains less than 1 Amp for 10 minutes, the numeric
display is turned off to conserve power. When asleep, pressing either
SET or SEL reactivates the numeric display. The numeric display
automatically wakes up when the rate of charge or discharge exceeds 1
Amp. The Automatic Sleep Mode is ideal for Electric Vehicles.
DEFAULT: ON RANGE: OFF or ON
RESET DATA LOCK FUNC