- 7 -
entering the heart rate display mode. The available channels are CH10, CH11,
CH12, CH13 and CH14.
The channel can be changed by briefly removing the battery from the chest belt and
reinserting it. The chest belt will randomly select a channel and after approx. 1
minute the heart rate and the new channel will appear on the display of the watch.
Bicycle holder
Using the bicycle holder
The included bicycle holder can be used to attach the heart rate monitor to the
handlebar of a bicycle. Press the bicycle holder onto the top of the handlebar.
Handlebars with an especially large diameter may require the use of additional
force to snap on the bicycle holder. The heart rate monitor can now be attached to
the bicycle holder in the same way that you would attach it to your wrist.
The maximum range of 60cm between the heart rate monitor and the chest belt
should not be exceeded.
Please note that the pedometer features of the heart rate monitor (distance, speed
etc.) will not be functional while the watch is mounted on the bicycle holder.
Light
Briefly press
LIGHT
to temporarily activate the light.
- 8 -
Important information regarding the use of the Heart
rate monitor watch.
Press
MODE
to select or exit the modes of the watch. Press
SEL
to enter your
personal data and press
SET
to confirm the setting.
Press
MODE
to proceed within the menu.
Quick setting
Press and hold
SEL
when setting numerical values to use the quick setting feature.
Setting up the heart rate monitor watch
Remove the protective film from the display of the watch and press
MODE
,
SEL
or
SET
. The watch will now guide you through the initial settings menu.
Press
SEL
to select the English or German language (DEU/ENG) and confirm your
setting by pressing
SET
. Select the unit (EINH/UNIT) of measurement KM or miles in
the same way. Enter your year of birth (GEB/BIRtH). Press
SEL
to set the value and
press
SET
to confirm the setting. Set the month and the day of your birth in the same
way. Now select 12 or 24-hour time display mode (ZEIt/TIME) by pressing
SEL
and confirm your setting by pressing
SET
. Now set the hours, minutes and seconds.
Set each value by pressing
SEL
and confirm each setting by pressing
SET
. Set the
year, month and day in the same way and confirm each setting by pressing
SET
. The
body weight setting now appears. Set your weight by pressing
SEL
and confirm by
