Crest Ultrasonics Corp.
Manual #9907-103-OJSTD
•
Page 37
3.2 USE OF SPECIAL OPTIONS:
Rotation
, continued
CAUTION: Do not over-tighten chains.
Bearings may be damaged by over-tightening.
Also, check the position of the
drive rollers
on
their shafts for alignment in the tanks. The rollers
must be aligned to allow the rotating barrel to seat
properly. For systems with automation, all rollers
must be positioned properly relative to the axis of
travel for the barrel to seat properly.
Parts Carriers
Crest supplies parts carriers of various designs and
mesh sizes to accommodate different parts
configurations.
