5
Creotech Instruments S.A.
tel. +48 22 233 10 27
ul. Gen. L. Okulickiego 7/9
e-mail: [email protected]
05-500 Piaseczno, Polska www.creotech.pl
1.4
Overview of the product
1
Ethernet port: connects the IP Power Strip to the local network using a CAT5 network
cable (or directly to the PC using included crossover patch cord for the first start-up)
Two Ethernet link status LEDs (LINK, ACT): indicate the state of the Ethernet
connection
LINK LED ON – The Ethernet link is up
LINK LED OFF – The Ethernet link is down
ACT LED ON – active data transfer
ACT LED OFF – no data transfer active
2
6 power outlet status LEDs:
indicate the state of the relays for each of the power outlets 1..6
OFF: relay OFF (no power on outlet)
ON: relay ON (power on outlet)
3
Control unit power LED: indicates the state of the control unit.
OFF – control unit OFF
ON – control unit ON
4
Reset button: restores the default settings of the Ethernet interface (see 4.2)
5
Fuse
6
Power Cord
