28
Creotech Instruments S.A.
tel. +48 22 233 10 27
ul. Gen. L. Okulickiego 7/9
e-mail: [email protected]
05-500 Piaseczno, Polska www.creotech.pl
4.
Maintenance and cleaning
4.1
Safety precautions
See safety warnings (section 2.2) before using or maintaining the device.
Never open enclosure of the IP Power Strip (may cause electric shock).
4.2
Maintenance and cleaning by users
Cleaning the product:
1)
Unplug the main power cord from the IP Power Strip.
2)
Use a dry sponge to clean the product.
3)
Do not use aerosol cleaners, alcohol, thinner, benzene etc. to clean
the product
4)
Re-plug the power cord.
Restoring the default settings:
1)
Switch the IP Power Strip off using main power switch.
2)
Press and hold reset button (using a non-conductive item).
3)
While holding reset button switch the IP Power Strip on using main
power switch.
4)
When ACT and LINK leds blink, release the reset.
The default factory settings are:
IP address (static):
192.168.1.201
Login:
admin
Subnet mask:
255.255.255.0
Password:
123456
DHCP:
Disabled
Default outlet state:
all OFF
