29
Creotech Instruments S.A.
tel. +48 22 233 10 27
ul. Gen. L. Okulickiego 7/9
e-mail: [email protected]
05-500 Piaseczno, Polska www.creotech.pl
Replacing the blown fuse:
1)
Unplug the power cord from the IP Power Strip.
2)
Unscrew the fuse holder door and remove the fuse holder.
3)
Remove and replace the blown fuse with the new fuse. Make sure
that the fuse is of the same type and current rating (
Ø
5 mm x 20 mm, 16 A,
250 VAC, slow-blow fuse).
4)
Install the fuse holder door.
5)
Re-plug the power cord.
Replacing the real-time clock battery:
IP power strip equipped with a real time clock with battery backup. To replace the battery one
should reported to the manufacturer, battery shouldn't be replaced under any circumstances by
unauthorized person.
