8
Creotech Instruments S.A.
tel. +48 22 233 10 27
ul. Gen. L. Okulickiego 7/9
e-mail: [email protected]
05-500 Piaseczno, Polska www.creotech.pl
2.
Preparing the product for use
2.1
Transport and storage
The product should always be kept in a safe and stable environment, both when in use and in
storage. In particular the product should be kept away from:
-
direct sunlight,
-
extreme changes in temperature or humidity,
-
high levels of dust and pollution,
-
fire,
-
high temperature and humidity,
-
heating and cooling equipment,
-
locations where it might become wet,
-
vibration and impact.
2.2
Safety precautions before use
This document presents important information intended to ensure safe and effective use of this
product. Please read this document carefully, and KEEP FOR FURTHER REFERENCE.
Safety warnings
:
-
This product is intended to use only in power supply network with protective earthing line.
-
Shut down this equipment immediately if it produces smoke, a strange odor or unusual noise.
Immediately unplug the power cord and contact your dealer for advice.
-
Never attempt to repair this product by yourself ( improper repair work can be dangerous).
-
Never disassemble or modify this product (it may result in injury, fire or electric shock).
-
Be sure to use the specified power source (connection of improper power source may cause fire or
electric shock).
-
Never insert or disconnect the power plug with wet hands (it may result in electric shock).
-
Do not allow foreign object to get into the device (it may lead to fire or electric shock).
-
If water or other liquid spills over the device unplug the power cord immediately and then contact
your dealer or a service center for advice (continued usage may lead to fire or electric shock).
-
Handle the power cord with care (improper handling may lead to fire or electric shock):
o
Do not modify or attempt to repair the cord.
o
Do not place any object on top of the cord.
o
Avoid excessive bending, twisting and pulling.
o
Do not place near devices emitting lots of heat and radiators.
o
Ensure that the plug is clean before plugging it in.
o
If the cord becomes damaged, stop using it and contact your dealer for advice.
-
Do not use in locations subject to high humidity or dust levels (it may cause damage, fire or electric
shock).
-
To ensure safety, please unplug this product prior to leaving it unused for an extended period of
time.
