4
Creotech Instruments S.A.
tel. +48 22 233 10 27
ul. Gen. L. Okulickiego 7/9
e-mail: [email protected]
05-500 Piaseczno, Polska www.creotech.pl
1.2
General functions and range of applications
The IP Power Strip (CTI-PS6) devices are stand-alone, network-manageable programmable control
units for six 230V power outlets. The control can be done remotely through webpage, SNMP or
telnet interfaces (available via 10Mbps Ethernet link). Watchdog function for response to the ping
command, allows to perform automatic reset of network devices. It is intended for use in home and
office environment and for indoor use only
This device allows:
-
Protection of the connected circuits (varistors)
-
Automatic hard reset of the connected devices by setting:
-
Maximum power consumption (CTI-PS6-M only)
-
The lack of response to the ping
-
Scheduling switching sockets based on the calendar
-
Remote control of each of the sockets with additional functions:
-
Configure the default state of sockets after power failure
-
Switching sockets on and off for defined time
-
Built-in sequencing of the power outlets to prevent from large inrush currents
Exemplary applications:
-
Remote switching on and off of non-easily accessible devices
-
Hard-reset of network devices with sequential power-up
-
Switching devices for pre-defined period of time
1.3
Producer and technical support center
Producer / technical support:
Name:
Creotech Instruments S.A.
Address:
ul. Okulickiego 7/9, 05-500 Piaseczno, Poland
E-mail:
WWW:
www.creotech.pl
Telephone:
+48 22 233 10 27
