10
Creotech Instruments S.A.
tel. +48 22 233 10 27
ul. Gen. L. Okulickiego 7/9
e-mail: [email protected]
05-500 Piaseczno, Polska www.creotech.pl
2.6
Installing and assembling
IP Power strip should be placed in a solid, stable location (e.g. floor).
2.6.1
First start-up and configuration
Before the IP Power Strip can be operated through network it is necessary to follow a fist-start-up
procedure:
1.
Attach the power cord to the IP Power Strip and switch the main switch on. (The power
status LED should turn ON).
2.
Restore the factory settings (refer to 4.2).
3.
Connect the IP Power Strip and a PC computer directly using crossover Ethernet patch cord.
4.
Modify the TCP/IP protocol settings in a PC to communicate with IP Power Strip using default
network settings. (see 2.6.1.1)
5.
Log in to the IP Power Strip using a web browser and default login / password. (see 2.6.1.2)
6.
Change the network settings of the IP Power Strip to comply with the requirements of a
target network. (see 2.6.1.3)
7.
Save settings and reboot the IP Power Strip using Status tab (see 2.6.1.3).
