6-22 Memory Configuration and BIOS Settings
IDE
Secondary
Slave UDMA
On this motherboard, Intel PIIX4 improves IDE transfer
rate using Bus Master UltraDMA/33 IDE which can
handle data transfer up to 33 MB/sec. The setting can be
Disabled, Enabled or Auto. The default setting is Auto.
Note: For this feature to work, your hard disk drive must
also support UDMA.
On-Chip
Primary PCI
IDE
Your system includes two built-in IDE controllers, the
primary and the secondary, both of which operate on the
PCI bus. This item allows you to enable or disable the
primary controller. If you add a higher-performance or
specialized controller, you may choose to disable the
primary controller.
On-Chip
Secondary
PCI IDE
Allows you to enable or disable the secondary controller.
If you add a higher-performance or specialized controller,
you may choose to disable the secondary controller.
USB
Keyboard
Support
Enables or disables the USB keyboard support.
KBC Input
Clock
Sets the input clock to onboard keyboard controller
(KBC). The setting can be 8 MHz or 12 MHz.
Onboard FDC
Controller
Specifies the onboard floppy disk controller (FDC). This
setting allows you to connect your floppy disk drives to
the onboard floppy connector. If you have a separate
control card, select Disabled for this item.
Onboard
Serial 1
Sets the onboard serial port 1 to 3F8/IRQ4, 2F8/IRQ3,
3E8/IRQ4, 2E8/IRQ3, Auto or Disabled.
Onboard
Serial 2
Sets the onboard serial port 2 as 3F8/IRQ4, 2F8/IRQ3,
3E8/IRQ4, 2E8/IRQ3, Auto or Disabled.
UR2 Mode
The default setting is SBIrDA.
UR2 Duplex
Mode
Specifies whether the onboard infrared transfer mode is
full duplex or half duplex. The default setting is Full for
full duplex.
Onboard
Parallel Port
Sets the onboard parallel port address to 378H, 278H,
3BCH or Disabled.
Table 6-9: The Integrated Peripherals Screen items.
Item
Description
Содержание Blaster PC M001
Страница 1: ...TM M001 Motherboard...
Страница 3: ...ii...
Страница 14: ...The M001 Motherboard 1 5 Figure 1 1 The M001 motherboard...
Страница 67: ...Printed in Singapore...