4-2 Connectors
Power LED Connector (J25)
The Power LED (CHS LED) connector is a 3-pin connector connected
to the casing’s Power LED. Pins 1 and 3 are for the power LED, and
pin 2 is empty.
Speaker Connector (J27)
You may attach a 4-pin PC speaker cable to the PC speaker connector.
HDD LED Connector (J28)
A 4-pin IDE drive LED cable is attached to this connector.
The LED lights up when an IDE device is active.
ATX Power On/Off Switch Connector (JP15-PWR_ON)
A 2-pin momentary type switch is attached to this connector.
The switch is used to turn your ATX power supply on and off.
Back Panel Connectors
Figure 4-2 below shows the back panel connectors of your
motherboard.
COM1/COM2 Connectors
Attach COM1/COM2 device cables to these connectors.
Figure 4-2: The back panel connectors.
Содержание Blaster PC M001
Страница 1: ...TM M001 Motherboard...
Страница 3: ...ii...
Страница 14: ...The M001 Motherboard 1 5 Figure 1 1 The M001 motherboard...
Страница 67: ...Printed in Singapore...