Memory Configuration and BIOS Settings 6-19
Used MEM Length
This item is used to select a length for the memory
area specified in the previous item.
This item does not appear if no base address is
specified.
The available settings are 8K, 16K, 32K and 64K.
Assign IRQ for USB
Specifies whether to assign an IRQ line to the
on-board USB controller.
Since the on-board controller is always enabled ,
if no IRQ line is assigned to it, an error will be
reflected on the system device under windows 95
Device Manager.
MS IRQ Routing
Table
Specifies whether the BIOS IRQ Routing Table is
enabled or disabled.
PCI Latency Timer
The PCI Latency Timer is used to ensure that the
PCI agents are given a minimum amount of the
system resource.
The number of clocks programmed in the PCI
Latency Timer represents the guaranteed time
slice allocated to the 440BX, after which it must
complete the current data transfer phase and
surrender the bus as soon as its bus grant is
removed.
The default setting is 64 PCI clocks.
Table 6-8: The PnP/PCI Configuration Screen items.
Item
Description
Содержание Blaster PC M001
Страница 1: ...TM M001 Motherboard...
Страница 3: ...ii...
Страница 14: ...The M001 Motherboard 1 5 Figure 1 1 The M001 motherboard...
Страница 67: ...Printed in Singapore...