6-16 Memory Configuration and BIOS Settings
Throttle Duty Cycle
This item defines the duty cycle for the clock
control thermal throttling mode. The duty cycle
indicates the percentage of time while in the
thermal throttle mode. The available settings are
between 12.5% and 87.5%.
ZZ Active in Suspend
When this item is enabled, the ZZ signal will be
active during Suspend mode.
VGA Active Monitor
If this item is enabled, the VGA activity event
will be monitored to reload the global timer.
Soft-Off by
PWR-BTTN
(This feature is
available for ATX
power only.)
When this item is set to Instant-Off, the ATX
switch functions as a normal system power-off
button when pressed for less than 4 seconds. The
setting of Delay 4 Sec allows the button to have a
dual function, whereby pressing the button for
less than 4 seconds will place the system in
Suspend mode, and pressing the button for more
than 4 seconds will shut the system off.
CPUFAN Off In
Suspend
This item defines the CPU fan status when the
system enters suspend mode. The available
settings are Enabled and Disabled.
Resume by Ring
When this item is enabled, the system will resume
through the activation of the modem ring.
Resume by Alarm
When this item is enabled, you can set the system
to resume at a certain date and time.
IRQ 8 Break Suspend
You can enable or disable the monitoring of IRQ8
(the Real Time Clock) so that it does not wake the
system from Suspend mode.
** Reload Global Timer Events **
If any of these items is enabled, that particular
system activity event will be monitored to reload
the global timer.
These items include IRQ[3-7, 9-15], NMI,
Primary IDE0/1, Secondary IDE 0/1, Floppy
Disk, Serial Port and Parallel Port.
Table 6-7: The Power Management Setup Screen items.
Item
Description
Содержание Blaster PC M001
Страница 1: ...TM M001 Motherboard...
Страница 3: ...ii...
Страница 14: ...The M001 Motherboard 1 5 Figure 1 1 The M001 motherboard...
Страница 67: ...Printed in Singapore...