Jumper Settings 5-3
To configure the CPU bus clock multiplier
The JP11, JP12, JP13, and JP14 jumpers are used to configure the
CPU bus clock multiplier. Use these jumper settings shown below to
achieve the corresponding multiplier ratio.
Table 5-2 shows the multiplier needed for various processor speeds
with the system clock speed at 66 MHz and at 100 MHz.
To configure the Host Bus Clock/CPU Core Clock ratio
(multiplier)
Set the jumper according to the multiplier that you want
(see Table 5-3).
Table 5-3 shows all the multipliers that the motherboard supports.
Table 5-2: Settings for System Clock and Multiplier.
Pentium II/
Celeron
Processor
System
Clock
Multiplier
Pentium II
Processor
System
Clock
Multiplier
233 MHz
66 MHz
3.5x
350 MHz
100 MHz
3.5x
266 MHz
66 MHz
4x
400 MHz
100 MHz
4x
300 MHz
66 MHz
4.5x
450 MHz
100 MHz
4.5x
333 MHz
66 MHz
5x
500 MHz
100 MHz
5x
Table 5-3: Jumper Settings for Multiplier.
Multiplier
JP11, JP12, JP13, JP14
Jumpers
Multiplier
JP11, JP12, JP13, JP14
Jumpers
2.5x
4x
Содержание Blaster PC M001
Страница 1: ...TM M001 Motherboard...
Страница 3: ...ii...
Страница 14: ...The M001 Motherboard 1 5 Figure 1 1 The M001 motherboard...
Страница 67: ...Printed in Singapore...