5-4 Jumper Settings
To configure the CPU external clock (system frequency)
Use the J201 jumper first to specify the hardware setting
corresponding to the processor type. The two J201 jumper settings
shown in Table 5-4 below correspond to the 66 MHz-based and 100
MHz-based system clock frequencies.
After selecting the hardware setting, you select the specific system
clock (CPU external clock) frequency within the 66 MHz to 112 MHz
range through BIOS settings (for details, see “Chipset Features Setup”
on page 11).
For 66 MHz-based Pentium II/Celeron processors, possible system
clock speeds are 66 MHz, 68 MHz, 75 MHz, and 83 MHz. For 100
MHz-based Pentium II processors, possible system clock speeds are
100 MHz, 103 MHz, and 112 MHz.
3x
4.5x
3.5x
5x
Table 5-3: Jumper Settings for Multiplier.
Multiplier
JP11, JP12, JP13, JP14
Jumpers
Multiplier
JP11, JP12, JP13, JP14
Jumpers
Содержание Blaster PC M001
Страница 1: ...TM M001 Motherboard...
Страница 3: ...ii...
Страница 14: ...The M001 Motherboard 1 5 Figure 1 1 The M001 motherboard...
Страница 67: ...Printed in Singapore...