background image

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. There is no guarantee that interference 

will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the contents here and 

specially disclaims any implied warranties of merchantability or fitness for any purpose. Further 

the vendor reserves the right to revise this publication and to make changes to the contents here 

without obligation to notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first obtaining the 

vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and we will not be 

responsible for any mistakes found in this user’s manual. All the brand and product names are 

trademarks of their respective companies.

Dichiarazione di conformità sintetica

Ai sensi dell’art. 2 comma 3 del D.M. 275 del 

30/10/2002

Si dichiara che questo prodotto è conforme 

alle normative vigenti e soddisfa i requisiti 

essenziali richiesti dalle direttive

2004/108/CE, 2006/95/CE e 1999/05/CE

quando ad esso applicabili

Short Declaration of conformity 

We declare this product is complying with the 

laws in force and  meeting all the essential 

requirements as specified by the directives

2004/108/CE, 2006/95/CE and 1999/05/CE

whenever these laws may be applied

Summary of Contents for TB360-BTC PRO 2.0




























































Reviews: