Microchip Technology PL360G55Cx-EK, User Manual

Page: 1 / 17

PL360G55Cx-EK
Smart Energy: Serial Bootloader User Guide
Introduction
The serial bootloader of the PL360G55Cx-EK boards allows the user to load application binaries in the
SAMG55J19 using one of the serial interfaces available in the boards.
The package contains all necessary sources to modify and compile the embedded serial bootloader,
including the project files for IAR Embedded Workbench
®
.
Section 1: Overview provides an overview of the serial bootloader and the contents of the package.
Section 2: Installation and Getting Started gives a brief step-by-step description about how to upload a
new firmware application binary.
Appendix A: Bootloader Commands resumes the supported bootloader commands.
Appendix B: How to Flash the Serial Bootloader Binary explains step-by-step how to Flash the bootloader
in the SAMG55J19.
Features
• For PL360G55CB-EK and PL360G55CF-EK Boards
• Firmware Programming over UART and USB Serial Interfaces
©
2019 Microchip Technology Inc.
User Guide
DS50002878A-page 1