BCM EBC5852-C8, Quick Start Card

Page: 1 / 3

SATA cable
User’s Quick Start Card
Version 1.00
http://www.bcmcom.com
Inspect the Package:
One EBC5852-C8 Motherboard
One IDE Cable
One SATA Cable
One
K/B & M/S Y type cable
One Driver CD/DVD
One User’s Quick Start Card
Responsibility:
This manual is provided “As-Is” with no warranties of any kind, expressed or implied, including, but not limited to the
implied warranties or conditions of this product’s fitness for any particular purpose. In no event shall we be liable for any
loss of profits, loss of business, loss of data, interruption of business, or indirect, special, incidental, or consequential
damages of any kind, even the possibility of such damages arising from any defect or error in this manual or product. We
reserve the right to modify and update the user manual without prior notice.
WARNING: CMOS Battery Damage
Replace your system’s CMOS RAM battery only with the identical CR-2032 3V Lithium-Ion coin cell (or equivalent) battery
type to avoid risk of personal injury or physical damage to your equipment. Improper installation might cause battery to
explode. Always dispose of used batteries according to the manufacturer’s instructions, or as required by the local
ordinance (where applicable). The damage due to not following this warning will void your motherboard’s manufacturer
warranty.
Additional Information:
Additional information on setting this board up can be found in the User’s Manual in the provided CD or DVD ROM. The
Online User’s Manual and FAQ/Knowledge Base can be found on our website by visiting our website:
http://www.bcmcom.com . If your question is not answered in our FAQ/Knowledge Base, visit our forums and post your
messages or submit a new FAQ through FAQ Submittal form for us to add your question in our FAQ with our answer.
ATTENTION: Incorrect BIOS Setup
If you do not know how to handle BIOS setup or how to set it up properly, it is strongly advisable that you do not modify
any of the settings than otherwise instructed in the User’s Quick Start Card. Even a seemingly small incorrect adjustment
or modification in the BIOS setup can render your system unstable or unusable. Incorrect BIOS setup is not covered by
your motherboard’s manufacturer warranty. Try Clear CMOS information when system does not boot after BIOS settings
change.
EBC5852-C8
K/B & M/S Y
type cable
Audio Line_Out header (CN10)
Pin # Assignment Pin # Assignment
1 LOUT_L 1 LOUT_L
2 AU_GND 2 AU_GND
3 VCC 3 VCC
4 LOUT_R 4 LOUT_R
USB 2/3 header (CN11); USB 4/5 header (CN12)
Pin # Assignment Pin # Assignment
1 VCC 2 VCC
3 USB2 -
USB4 - 4 USB3 -
USB5 -
5 USB2 +
USB4 + 6 USB3 +
USB5 +
7 Ground 8 Ground
9 --- 10 NC
CD_In header (CN13)
Pin # Assignment
1 CD_IN_Left
2 CD_GND
3 CD_GND
4 CD_IN_Right
LAN1 LED header (CN14); LAN2 LED header (CN16)
Inverter connector (CN15)
Pin # Assignment
1 Ground
2 NC
3 LCD_BKL
4 Ground
5 +12V
COM2 connector (CN20)
Pin # Assignment Pin # Assignment
1 DCD (Data
Carrier Detect)
2 DSR (Data Set
Ready)
3 RXD (Receive
Data)
4 RTS (Request to
Send)
5 TXD (Transmit
Data)
6 CTS (Clear to Send)
7 DTR (Data
Terminal Ready)
8 RI (Ring Indicator)
9 Ground
Pin # Assignment Pin # Assignment
1 LINK_LED 2 VCC_3V
3 ACT_LED 4 VCC_3V
LVDS panel interface (CN17)
SMBus connector (CN22)
Pin # Assignment
1 SMBData
2 SMBClock
3 Ground
4-pins 12V/5V output power connector (CN24)
Pin # Assignment
1 +12V
2 Ground
3 Ground
4 5V
System panel indicate pin-header (CN25)
Pin # Assignment Pin # Assignment
1 NC 2 NC
3 Ground 4 Ground
5 YAM0 6 YAM1
7 YAP0 8 YAP1
9 Ground 10 Ground
11 YAM2 12 CLKAM
13 YAP2 14 CLKAP
15 Ground 16 Ground
17 YAM3 18 YBM0
19 YAP3 20 YBP0
21 Ground 22 Ground
23 YBM1 24 YBM2
25 YBP1 26 YBP2
27 Ground 28 Ground
29 CLKBM 30 YBM3
31 CLKBP 32 YBP3
33 NC 34 +12V
35 NC 36 +12V
37 NC 38 VCC_LCD
39 BKL 40 VCC_LCD
Pin # Assignment Pin # Assignment
SPEAKER PWR LED
1 +5V 2 5V
3 NC 4 NC
5 BZ 6 Ground
7 SPKR KEYLOCK
HDD LED 8 KBLOCK
9 5V 10 Ground
11 HDLED- 12 NC
RESET PWR ON
13 RESET+ 14 VCC
15 Ground 16 PWRBT-