Crary Air Reel, Руководство пользователя

Страница: 50 / 60

PN 12071 R122210 46
SERVICE & MAINTENANCE
Every 40 hours the fan housing and airway should be
checked for wear (Figure 51).
6.8 FAN HOUSING AND AIR HOSE
6.9 FRICTION DISC TORQUE LIMITER
1. Disconnect the PTO driveline from the implement
(Figure 52).
2. Position the driveline on a workbench.
3. Loosen the eight nuts.
4. Remove bolts and disassemble all components.
5. Check the condition of all parts, especially the friction
discs (Figure 53).
6. If replacement parts are needed, consult your local
authorized Crary dealer.
7. Reassemble all components.
8. Tighten nuts following an alternating cross pattern until
the clutch slips momentarily upon initial startup and then
continues to operate normally.
Figure 51: Fan housing and air hose
Figure 52: Check condition of torque limiter (slip clutch)
Figure 53: Exploded view of torque limiter