manualshive.com logo in svg

Crary Air Reel, Руководство пользователя, Страница: 2 / 60

Поделиться
Скачать
Crary Air Reel Скачать руководство пользователя страница 2

© 2010, Crary Industries,  All rights reserved.  Produced and printed in the USA.

HOW TO REACH US

ADDRESS

HOURS

TELEPHONE

FAX NUMBER

E-MAIL

INTERNET

Crary Industries, Inc.

237 12

th

 St. NW

West Fargo, ND 58078

Monday-Friday      

8 am-5pm (CST)

For Parts and Service:

Ph: 701.282.5520 • 

800.247.7335

Fax: 701.282.9522

Email: [email protected] • 

[email protected]

Online: www.crary.com

DISCLAIMER

This document is based on information available at the time of its publication.  While efforts have been made to be ac-
curate, the information contained herein does not purport to cover all details or variations, nor to provide for every pos-
sible contingency in connection with installation, operation, or maintenance.  Features may be described herein which 
are not present in all systems.  Crary Industries assumes no obligation of notice to holders of this document with respect 
to changes subsequently made.

Crary Industries assumes no responsibility for the accuracy, completeness, suf

fi

 ciency, or usefulness of the information 

contained herein.

SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Crary Industries is continually making improvements and developing new equipment.  In doing so, we reserve the right 
to make changes or add improvements to our product without obligation for equipment previously sold.

Because modi

fi

 cation to this machine may affect the performance, function, and safety of its operation, no modi

fi

 cations 

are to be made without the written permission of Crary Industries.  Part replacements should be with original equipment 
supplied by Crary Industries.

THE CRARY INDUSTRIES STATEMENT OF PRODUCT SAFETY

As a manufacturer of specialized agricultural equipment, Crary Industries fully recognizes its responsibility of providing 
its customers products that perform their expected use in a reasonably safe manner.  Safety considerations shall be an 
integral and high priority part of all engineering/design analysis and judgments involving Crary products.  It is our stated 
policy that our products will be manufactured to comply with the safety standards speci

fi

 ed by the American Society of 

Agricultural Engineers, the National Electrical Code, the Society of Automotive Engineers, and/or any other applicable 
recognized standards at the time manufactured.  However, this statement should not be construed to mean that our 
product will safeguard against a customer’s own carelessness or neglect in violating common safety practices speci

fi

 ed 

in each product’s manual, nor will we be liable for any such act.

SERIAL NUMBER LOCATION

Always give your authorized Crary dealer the serial number 
of your machine when ordering parts, requesting service, or 
any other information. The serial number decal is located on 
the front, left hand end of the air manifold.

Please record the serial number in the space provided on 
the front cover and on the warranty and registration card.

MANUFACTURED BY CRARY INDUSTRIES

MANUFACTURED IN U.S.A.

XXXXXX

WEST FARGO, NORTH DAKOTA 58078 U.S.A.

SERIAL NUMBER

Serial Number Decal

Содержание Air Reel





























































Отзывы:

Нет отзывов